|Topic: New solenoid Part No 1502148||TB No.: 10045||Date: July 2017|
|Affected Machines:||PB5/ PB10||Priority: Low||Created By: Gareth Fitzpatrick|
|From Serial No.:||Created For: Technicians||Part Update|
|From Date:||Jan 2017||Pages: 1/2|
Dispense solenoid 1502156 has been replaced with 1502148 as part of a part improvement. The only noticeable difference is the physical size of the solenoid coil which is larger.
It is not necessary to change existing machines, this is an updated part and will be used as a direct replacement to 1502156
The dispense solenoid you receive may have a different orientation to the one in the machine.
- There is two options to adjust the orientation
- Loosen the 10 mm screw on the top of the coil and rotate as necessary. Position 1
- Remove the four white securing pins and change the orientation of the inlet/ Outlet as desired. Position 2
- Secure in position with the 4 white securing pins.